|
Meade #933 45° Erecting Prism for ETX-70 AT Only. tronomical telescopes, images throughthe ETX-60AT and ETX-70AT appear right-side-up but reversed left-for-right. For astronomical viewing this orientation is of no consequence. However, for terrestrial observing, where a fully correctly oriented image is desirable, the #933 45? Erecting Prism threads on to the telescope's rear cell and accepts an eyepiece of any focal le...
Meade #933 45° Erecting Prism for ETX-70 AT Only. - name
|
|
Meade DC Powered Fan Accessory for all Deep Sky Imager (DSI) Cameras. cameras a boost by enhancing its air cooled properties. The fan fits all Deep Sky Imager cameras and will keep the camera up to 9 degrees Farenheit cooler than using the camera out a fan. It comes equipped a battery pack for simple in the field use Batteries not included. It will also work a Meade #541 Power Supply. ...
Meade DC Powered Fan Accessory for all Deep Sky Imager (DSI) Cameras.
|
|
Meade 6.4mm Series 4000 1.25" Super Plossl Eyepiece with 52 Degree Field of View. The world standard in telescope oculars, Meade Series 4000 eyepieces yield the widest possible fields of view, consistent pinpoint edge-of-field sharpness and long eye relief?and yet extremely low astigmatism, spherical aberration, and off-axis color. Incorporating 7-layer multi-coatings and edge-blackened optics for optimum image contrast, these sophisticated 4 to 8-element designs permit l...
Meade 6.4mm Series 4000 1.25" Super Plossl Eyepiece with 52 Degree Field of View. - technical specifications
|
|
Meade Filter Set #1 (1.25") with 12, 23A, 58, 80A Filters > Contrasts strongly blue-colored features on Jupiter and Saturn, while enhancing red and orange features. Lightens red-orange features on Mars, while reducing or blocking the transmission, and thereby increasing the contrast, of blue-green areas. Useful in increasing the contrast of lunar features in t...
Meade Filter Set #1 (1.25") with 12, 23A, 58, 80A Filters
|
|
Meade Filter Set #2 (1.25") with 11, 25A, 47, 82A Filters ed; #47 Violet; #82A Light Blue.<B>#11 Yellow-Green 78% transmission -</B> Contrasts well the red and blue characteristics of surface features on Jupiter and Saturn. Darkens the maria visible on Mars, and clarifies the Cassini division in Saturn's rings.<B>#25A Red 14% transmission -</B> The #25A filter strongly blocks the tran...
Meade Filter Set #2 (1.25") with 11, 25A, 47, 82A Filters - product specifications
|
|
Meade Filter Set #3 (1.25") with 8, 21, 38A, 56 Filters e; #38A Dark Blue; #56 Light Green.<B>#8 Light Yellow 83% transmission -</B> Useful in observing red and orange-colored phenomena in the belts of Jupiter and in enhancing the level of observable detail of small orange-red zonal features in the belts of the planet. Increases contrast of maria on Mars. Can result in improved resolution of dusky detail on Uranus...
Meade Filter Set #3 (1.25") with 8, 21, 38A, 56 Filters
|
Furniture Manufacturers - a site to visit Photography, posters, wall art and other items
|
DYS / DYV / BHC Projector & Studio Lamp 600w 120v ...
DYS / DYV / BHC Projector & Studio Lamp 600w 120v
|
|
PH111A Enlarger Lamp 75w 125v ...
PH111A Enlarger Lamp 75w 125v - name
|
|
Adorama 55mm Metal Lens Hood y light and unwanted reflections which result in reduced contrast and possible "ghost Images". In general, the use of a lens hood is recommended because better contrast improves the appearance of the photograph. This accessory also offers protection for the front lens element against rain and mechani...
Adorama 55mm Metal Lens Hood - name
|
|
Adorama 58mm Metal Lens Hood light and unwanted reflections which result in reduced contrast and possible "ghost Images". In general, the use of a lens hood is recommended because better contrast improves the appearance of the photograph. This accessory also offers protection for the front lens element against rain and mechanical damage. Metal Lens Hood are made of black anodized aluminum. It is suita...
Adorama 58mm Metal Lens Hood and other items
|
|
Adorama Universal Print Mounting Tissue, for All Photographic and Digital Inkjet Papers, 11" x 14", Package of 25 Sheets. e for both Fibre and RC Papers at a reasonable price! ImageMaker One Dry Mount Tissue is the one tissue you can use for all of your photographic and digital mounting needs: Fibre based Paper, Resin-Coated Paper, Open Stock or Clay-Coat Papers. This tissue is a porous, removable tissue which achieves very strong bonding at a wide range of temperatures, making it id...
Adorama Universal Print Mounting Tissue, for All Photographic and Digital Inkjet Papers, 11" x 14", Package of 25 Sheets. - more info
|
|
